Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kitamura, Akihiro; Hirano, Hiroshi*; Yoshida, Masato
Nuclear Engineering and Design, 411, p.112435_1 - 112435_14, 2023/09
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)This study presents the features and brief history of the glovebox dismantling facility and the primary dismantlement results. Subsequently, we evaluate the novelties of the facility from operational experiences in manual and remote glovebox dismantlement methods and discuss their characteristics. Furthermore, we evaluate the worker exposure dose based on the obtained data. Finally, we show how these experiences are effectively fed back to the technological dismantlement development for our decommissioning project.
Kitamura, Akihiro; Hirano, Hiroshi*; Yoshida, Masato; Takeuchi, Kentaro
Hoken Butsuri (Internet), 58(2), p.76 - 90, 2023/08
The alpha contaminated gloveboxes have been dismantled for over 20 years in Plutonium Fuel Fabrication Facility. The so called wet recovery equipment gloveboxes, which recover plutonium and uranium from scrap fuel by dissolving and extracting processes, were chosen as the priority gloveboxes to be dismantled. These gloveboxes and other gloveboxes in the same room were size reduced and removed up until 2022. Also, non-radioactive ancillary facility and non-radioactive giant glovebox were removed from 2007 to 2010 for ease of glovebox dismantling activities that follows and for making waste storage spaces. Several incidents were occurred and recidivism prevention measures were implemented on each occasion. In this report, glovebox dismantling activities we conducted in the past 20 years are reviewed and lessons we have learned are summarized.
Tashiro, Shinsuke; Ono, Takuya; Amano, Yuki; Yoshida, Ryoichiro; Watanabe, Koji*; Abe, Hitoshi
Nuclear Technology, 208(10), p.1553 - 1561, 2022/10
Times Cited Count：1 Percentile：0.01(Nuclear Science & Technology)To contribute to the confinement safety evaluation of the radioactive materials in the Glove box (GB) fire accident, combustion tests with the Polymethyl methacrylate (PMMA) and the Polycarbonate (PC) as typical panel materials for the GB have been conducted with a relatively large scale apparatus. As the important data for evaluating confinement safety, the release ratio and the particle size distribution of the soot generated from the burned materials were obtained. Furthermore, the rise of the differential pressure (
P) of the high efficiency particle air (HEPA) filter by the soot loading was also investigated. As results, the release ratio of the soot from the PC was about seven times as large as the PMMA. In addition, it was found that the behavior of the rise of the P with soot loading could be represented uniformly regardless of kinds of combustion materials by considering effect of the loading volume of the soot particle in the relatively low loading region.
Marufuji, Takato; Sato, Takumi; Ito, Hideaki; Suzuki, Hisashi; Fujishima, Tadatsune; Nakano, Tomoyuki
JAEA-Technology 2019-006, 22 Pages, 2019/05
JAEA-Technology-2019-006.pdf:2.84MB
Radioactive contamination incident occurred at Plutonium Fuel Research Facility (PFRF) in Oarai Research and Development Institute, Japan Atomic Energy Agency on June 6, 2017. During inspection work of storage container containing nuclear fuel materials, the PVC bag packaging in the storage container ruptured when a worker opened the lid in the hood, and a part of contents was spattered over the room. The cause of the increase of internal pressure of the storage container was gas generation by alpha radiolysis of the epoxy resin mixed with nuclear fuel materials. Opening inspection of about 70 similar containers stored in PFRF has been planned to confirm the condition of the contents and to stabilize the stored materials containing organic compounds. For safe and reliable open inspection of the storage containers with high internal pressure in the glove box, it is necessary to develop a pressure-resistant chamber in which the storage containers are opened and the contents are inspected under gastight condition. This report summarizes the concerns and countermeasures of the chamber design and the design results of the chamber.
Mori, Eito; Yamamoto, Masahiko; Taguchi, Shigeo; Sato, Soichi; Kitao, Takahiko; Surugaya, Naoki
Nihon Hozen Gakkai Dai-11-Kai Gakujutsu Koenkai Yoshishu, p.132 - 138, 2014/07
The contamination of the radioactive material was observed on the filter casing surface of the glove box installed at the analytical laboratory in Tokai Reprocessing Plant. The cause of the contamination was investigated with visual inspection, penetrant testing and ultrasonic thickness measurement. It was found that a micro through-hole due to the corrosion of stainless-steel was generated in the glove box filter casing. The repair work of the filter casing was performed keeping the glove box negative pressure. The corrosion part of filter casing was replaced and newly fabricated casing was connected to the glove box with Tungsten Inert Gas welding method.
Tashiro, Shinsuke; Abe, Hitoshi; Morita, Yasuji
JAERI-Conf 2005-007, p.348 - 350, 2005/08
Hot test at Rokkasho Reprocessing plant has been started since last year. In addition, construction of the MOX fuel fabrication facility at Rokkasho site is planning. So, the importance of safety evaluation of the nuclear fuel cycle facility is increasing. Under the fire accident, one of the serious postulated accidents in the nuclear fuel cycle facility, the equipments (glove-box, ventilation system, ventilation filters etc.) for the confinement of the radioactive materials within the facility could be damaged by a large amount of heat and smoke released from the combustion source. Therefore, the fundamental data and models calculating for the amount of heat and smoke released from the combustion source under such accident are important for the safety evaluation of the facility. In JAERI, the study focused on the evaluation of amount of heat and smoke released from the combustion source is planning. In this paper, the outline of experimental apparatus, measurement items and evaluation terms are described.
Serizawa, Hiroyuki; Kikuchi, Hironobu; Iwai, Takashi; Arai, Yasuo; Kurosawa, Makoto; Mimura, Hideaki; Abe, Jiro
JAERI-Tech 2005-039, 23 Pages, 2005/07
JAERI-Tech-2005-039.pdf:2.89MB
A high-temperature ultrasonic measuring system had been designed and installed in a glovebox (711-DGB) to study a mechanical property of nuclear fuel containing trans-uranium (TRU) elements. A figuration apparatus for the cylinder-type sample preparation had also been modified and installed in an established glovebox (142-D). The system consists of an ultrasonic probe, a heating furnace, cooling water-circulating system, a cooling air compressor, vacuum system, gas supplying system and control system. An A/D converter board and an pulsar/Receiver board for the measurement of wave velocity were installed in a personal computer. The apparatus was modified to install into the glovebox. Some safety functions were supplied to the control system. The shape and size of the sample was revised to minimize the amount of TRU elements for the use of the measurement. The maximum sample temperature is 1500 
C. The performance of the installed apparatuses and the glovebox were confirmed through a series of tests.
Kobayashi, Makoto
Hoken Butsuri, 34(4), p.412 - 414, 1999/12
no abstracts in English
Yamamoto, Hideaki; *; Kato, Shohei; Murata, Mikio; Kinouchi, Nobuyuki;
Proc. of the Int. Radiation Protection Association,Vol. 1, p.467 - 470, 1992/00
no abstracts in English
; ; Abe, Jiro; ; ;
JAERI-M 7601, 36 Pages, 1978/03
no abstracts in English
;
Nihon Genshiryoku Gakkai-Shi, 19(8), p.526 - 529, 1977/08
Times Cited Count：0no abstracts in English
Tashiro, Shinsuke
no journal, ,
In such as reprocessing facilities, radioactive materials with easy scattering into air are usually treated in the Glove-box (GB). Under the fire accident with GB panels burning, radioactive materials and soot will be together released within the facilities. When the high efficiency particle air (HEPA) filter in the ventilation system, which plays role of the confinement equipment for radioactive materials within the facilities, is damaged during such accident, it may lead to enhance the release of radioactive materials outside them. Based above background, the relationship between the quantity of soot loading onto the HEPA filter and the differential pressure (P) across the one was investigated. The tests with burning of major GB panels materials were performed using the large test apparatus (ACUA, Apparatus for Evaluating Clogging Effect of HEPA Filter on Confinement Capability Under Fire Accident), which enables to burn GB panels materials used as the GBs components in the actual facilities. The rising behavior of P has been evaluated with the increase of loading mass of soot, however, the relationship between loading volume of soot and P was newly examined in this study because the loading volume would be more appropriate than the loading mass as the index for expressing the progress of HEPA filter's clogging by soot loading. As a result, it was found that the rising behavior of P with soot loading in the relatively low region of loading volume could be uniformly represented regardless of combustion conditions such as the kind of GB panels materials and the ventilation in the cell for burning the material.
